Creep compliance deutsch

Deutsch Englisch-Wörterbuch von PONS Online:Compliance, Compliance-Regeln. LEOs Englisch ⇔ Deutsch Wörterbuch. Mit Flexionstabellen, Aussprache und vielem mehr.

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in . Equilibrium creep compliance (Englisch Deutsch Übersetzung). Burger model allows nonlinear viscoelastic.

Verlag Harry Deutsch Thun, Frankfurt. Equibiaxial extension, Zweiachsige, gleichförmige (äquibiaxiale) Dehnung, z. Exit pressure, Austrittsdruck . For dry atmosphere and NC with different filler content the creep compliance curves are given in Fig. As seen from the figure the inclusion of clay nanoparticles . D(t) can be given as the ratio of strain to stress at a certain time. Millionen Wörter und Sätze in allen Sprachen.

This property is often characterized as linear viscoelasticity. In the linear range, the compliance is independent of stress, which means that the compliance is the same whether stresses used in the creep test . The study was conducted using displace-recover programme on DMA creep mode with a single cantilever clamp. The of measurement of the shear and tensile creep compliance of poly(methyl methacrylate) between −1and 75°C.

The master curves show the creep behavior from essentially elastic response to the onset of the α-process. The logarithmic retardation spectra and shear loss compliance . A practical approach to . Biegesteife f bending rigidity, bending stiffness. Deutsch -Englisch Fachwörterbuch Architektur und Bauwesen.

Biegesteifigkeit f bending rigidity, bending stiffness, flexural creep compliance , flexural rigidity, flexural stiffness, . They perform strain measurement in accordance with test method requirements prescribed by the U. Federal Highways SHRP program. The goal of this doctoral thesis is the development of methods for the evaluation of the prediction quality of concrete creep models. The model quality is quantified by the total uncertainty of the predicted creep compliance.

Licence ( German ):, License Logo Creative Commons 4. It was found that creep resistance was significantly enhanced to different degrees by the nanoparticles, without sacrificing static tensile properties. The principle of linear viscoelastic material was fairly applicable to convert from the modulus to the creep compliance for all systems studied. The calculated storage creep compliance was constructed by applying the time- temperature superposition (TTS) principle. The effect of chemical modification on mechano-sorptive creep in bending was studied by experimental work. Holz, Biegeversuch, Beuth, Berlin (in German ). In linearly viscoelastic materials, the ____ ______ is independent of stress level.

If the load is released at a later time, the strain will exhibit recovery ____, or progressive decrease of ____.